Posted 2020-04-30 09:16:30 +0000 UTC
Recently, in the latest "road motor vehicle manufacturing enterprises and products announcement" of the Ministry of industry and information technology, the application information of Han DM reappeared. The front face shape of the new car is similar to the official figure issued at the beginning of the previous month. The front grille with grid shape rather than horizontal stripes is adopted to make the overall shape more dynamic and sharp. According to the application chart, the biyadihan DM is similar to the official chart released at the beginning of the month. The big mouth grille becomes more flat, and the chrome plating decorative strips extending from the headlamp penetrate the front face. The grid shape of the middle net is different from the previously exposed horizontal stretch stripe shape. In addition, the front bumper part also has obvious changes. The lines in the fog lamp area on the left and right sides are more sharp and more moving. The rear part of the new car is similar to the previous one, with straight through tail lights and chrome plated strips to further stretch the visual width. At the same time, the 4.7-second tailmark nameplate appears in the application diagram, which indicates that the acceleration time of byd-han DM model is 0-100km / h or 4.7 seconds. In addition, the overall length of the new car has also been adjusted, from 4980mm to 4960mm, adding options of door handle, side trim, rear camera and radar around the car. In terms of power, byd-han DM is equipped with a 2.0T turbocharged byd487zqb with a maximum power of 192 HP. At the same time, the plug-in hybrid system is equipped with a permanent magnet synchronous drive motor with a maximum power of 245 HP. According to the latest news, the new car is expected to be officially launched in the third quarter of 2020.
Copyright © 2020. TUTESL All rights reserved.