New vehicle planning of SAIC Rongwei in 2020, such as new ei6 / i5 cross

Posted 2022-12-19 00:00:00 +0000 UTC

In 2019, SAIC Roewe launched many popular models, such as rx5 max, rx5 Emax, i5 and ei6 plus. Recently, Netcom learned from SAIC Rongwei that in 2020, the brand will launch four new models. It includes the new model ei6 and i5 cross of Rongwei. Moreover, Rongwei vision im concept, a brand new model of the brand, will also be launched this year. Not only that, the rx5 of Rongwei will also usher in a new generation within the year. Roewe new ei6 is a brand-new pure electric vehicle under the brand, and the new car is also the first one of Roewe adopting "smart design". In terms of appearance, the overall design style of the new car is very dynamic. On the black closed grille in the front face, there is an English logo of Rongwei brand. The through type silver decorative strip is connected with the headlamp groups on both sides. The raised lines and black roof on the cover further enhance the visual experience. Rongwei's new ei6 adopts a double waistline design on the side, which to a certain extent lengthens the visual effect of the car. At the same time, the convex lines above the wheel arch create rich light and shadow effects on the body surface. In addition, Rongwei new ei6 is also equipped with an integrated panoramic roof, whose roof is completely covered by a whole piece of glass, which not only improves the transparency of the car, but also strengthens the natural connection of the roof and the body's fluid curved surface, and the visual effect is more prominent. In terms of tail, the horizontal tail lamp group is polygonal, with a slightly upwarped duck tail design, further increasing the movement atmosphere. In terms of power, the new pure electric version is equipped with a permanent magnet synchronous motor with a maximum power of 135kW, and matched with a group. The maximum endurance mileage is expected to exceed 600km. SAIC Roewe's i5 series models have two models: traditional fuel car i5 and pure electric traveling car ei5, and i5 cross can be regarded as the traditional fuel model. In terms of appearance, according to the previously exposed application chart, it can be seen that the new car is consistent with the current model, adopting the family style "rhythm design language", the arrow feather C position headlamp is connected with the grille, and the interior adopts the high and low beam integrated design. In terms of body size, the length, width and height of the new car are 4554 / 1818 / 1511 (1534 with luggage rack), and the wheelbase is 2665 mm. Compared with the electric version, the length and height of the new car body are increased. In terms of configuration, according to the different models, there are differences in the configuration of skylight, luggage rack, front camera, wheel rim, exterior rear-view mirror, side logo, etc., and the specifications are 205 / 60 R16. In terms of power, Rongwei i5 cross will be equipped with a 1.5L naturally aspirated engine of 15s4c, with a rated power of 88kw, matched with manual and CVT, and with front wheel drive. As the 1.5L engine used in the new car has been applied to the Roewe i5 hatchback and other models, as a reference, the peak torque of the Roewe i5 cross engine is 150 nm, and the manual gear model matches the 5-speed transmission. Rongwei vision im concept in 2019, SAIC Rongwei's new MPV concept car, Rongwei vision im concept. It is officially defined as the whole cabin digital cross-border MPV concept car. For the first time, it adopts the design method of full digital calculation, takes "motion is greater than law" as the design direction, integrates "emergence" aesthetics into the rhythm design language, and presents a stronger and deeper rhythm design. In terms of appearance, the overall shape of the new car is full. The front grille is designed in the Rongwei family design language, but it is more flexible. With the through type lamp set above, the new car looks very avant-garde. At the same time, the raised ribs on the front hatch cover also enhance the visual impression of the car. According to the official, in order to better balance the sense of space and exclusivity of MPV, Rongwei vision im concept adopts the cross-border posture proportion of + MPV to design, integrating the full front shape of SUV into the large space body of MPV, bringing a more novel visual impression. From the side, the ups and downs of the waistline design, the sense of strength and movement is more prominent. In terms of color selection, Rongwei brings a brand-new "cloud blue" to the car, creating a unique visual experience through strong color contrast. In terms of the rear end, the new car's rear end can be said to have implemented the "washing" principle, with simple lines and no redundant design. It looks fashionable and stable as a whole. The taillight design is unique and adopts the design style of three-dimensional hollowing. The red light refracted by the pyramid geometry unit inside is more obvious and the recognition degree is higher. In addition to the above three new models, Rongwei will launch a new generation of rx5 within this year, but at present, the official did not disclose the relevant information about the new car. However, the appearance and interior of the new generation of rx5 is expected to be upgraded from the inside out. In addition, various kinds of rich configurations, including "smart cockpit" and Internet car smart Travel System 3.0, will also be equipped on new cars. In 2019, Rongwei resisted the impact of the downturn of the car market and maintained a healthy development; in 2020, Rongwei developed from quantity to quality. This year, Rongwei has brought a new design language and a more complete product system, and further strengthened its leading advantages in the field of intelligent Internet connection to meet the demand of more consumers, which is expected to achieve better market performance.

Copyright © 2020. TUTESL All rights reserved.