CCC, CE, UL
|Ambient Humidity range for usage and storage||5% ~ 85°CRH|
|Ambient temperature range for usage and storage||-40°C ~ +85°C|
|Contact arrangement||Double make contacts(SPST-NO-DM)|
|Contact bounce time(at 20 °C)||7ms Max.(▲3)|
|Contact resistance(initial)||1mΩ Max.( at 1A)|
|Electrical life(▲2, ▲4)||3 000 times Min.|
|Energy-saving circuit board||Yes|
|Insulation resistance||Initial state: 100MΩ Min. (▲1) and End of lifetime:50MΩ Min. (▲1)|
|Maximum breaking current(only 1 breaking is allowed)||2000A 350 Vdc|
|Mechanical life||200 000 times(▲5)|
|Pull-in time(at 20 °C )||25ms Max.(▲3)|
|Rated control capability||200A 450 Vdc(▲2)|
|Rated duty||Uninterrupted duty|
|Rated short term tolerable of current and duration||300A 900 sec or 400A 200 sec|
|Rated working voltage||6Vdc, 12Vdc, 24Vdc, 28Vdc, 36Vdc, 48Vdc,72Vdc|
|Rated working voltage (Ue)||12-900Vdc|
|Release time (at 20 °C)||12ms Max.(▲7)|
|Security certificate||CE, CCC, UL|
|Segmented media type||Inert gas|
|Shock||20G Peak, 11ms 1/2 Sine wave(coil energized)|
|Type of current||Direct current (DC)|
|Vibration||20G Peak, 80~2000Hz,Sine wave|
|impulse withstand voltage(initial) between the contact and the coil||AC 2500 Vrms/1mA/1min.(Sea level)|
|impulse withstand voltage(initial) between the contacts||AC 2500 Vrms/1mA/1min.(Sea level)|
▲1: The measured voltage is DC500V; the test position is the same as the media withstand voltage.
▲2: Load class: DC-1, L / R ≤ 1 ms.
▲3: Coil exert rated working voltage, with contact bounce.
▲4: Rated control capacity, on and off conversion frequency, ON:OFF=1 second:9seconds.
▲5: ON and OFF conversion frequency,ON:OFF = 0.5 second : 0.5 second.
▲6: Auxiliary contact parameter:[email protected]/[email protected],600Vac 50/60Hz1min.
▲7: Coil exert rated working voltage, without freewheeling diode.
Copyright © 2020. TUTESL All rights reserved.